top of page
Blog Post
|
Blog Post
|

Flange Leakage App

Flange leakage is a tool designed for checking for ASME flange B16.5, B16.47. Judgement criteria is based on ASME section VII div.1 Appendix 2. This tool utilize ASME section VIII div1 Appendix 2 method in combination with the pressure equivalent method to take into account of the external axial force and bending moment to verify the leakage at the flange joint.

iOS app for ASME flange leakage verification under external  axial force and moment
Flange Leakage App

Privacy Policy

PbTechnic built the Flange leakage app as a Commercial app. This App is developed by PbTechnic and is intended for use as it is.

This page is used to inform visitors regarding our policies with the collection, use, and disclosure of Personal Information if anyone decided to use our Service.

If you choose to use our Service, then we would like to assure that we will not collect any data or information from you as described in this Privacy Policy.

The terms used in this Privacy Policy have the same meanings as in our Terms and Conditions, which is accessible at Flange Leakage unless otherwise defined in this Privacy Policy.

Changes to This Privacy Policy

We may update our Privacy Policy from time to time. Thus, you are advised to review this page periodically for any changes. We will notify you of any changes by posting the new Privacy Policy on this page.

This policy is effective as of 2021-06-26

Contact Us

If you have any questions or suggestions about our Privacy Policy, do not hesitate to contact us at: pd.bao@pbtechnic.com

Terms & Conditions

By downloading or using the app, these terms will automatically apply to you – you should make sure therefore that you read them carefully before using the app. You’re not allowed to copy, or modify the app, any part of the app, or our trademarks in any way. You’re not allowed to attempt to extract the source code of the app, and you also shouldn’t try to translate the app into other languages, or make derivative versions. The app itself, and all the trade marks, copyright, database rights and other intellectual property rights related to it, still belong to PbTechnic.

PbTechnic is committed to ensuring that the app is as useful and efficient as possible. For that reason, we reserve the right to make changes to the app or to charge for its services, at any time and for any reason. We will never charge you for the Flange Leakage App or its services without making it very clear to you exactly what you’re paying for.

Along the same lines, PbTechnic cannot always take responsibility for the way you use the app i.e. You need to make sure that your device stays charged – if it runs out of battery and you can’t turn it on to avail the Service, PbTechnic cannot accept responsibility.

With respect to PbTechnic’s responsibility for your use of the app, when you’re using the app, it’s important to bear in mind that although we endeavour to ensure that it is updated and correct at all times. PbTechnic accepts no liability for any loss, direct or indirect, you experience as a result of relying wholly on this functionality of the app.

At some point, we may wish to update the app. The app is currently available on iOS – the requirements for system(and for any additional systems we decide to extend the availability of the app to) may change, and you’ll need to download the updates if you want to keep using the app. PbTechnic does not promise that it will always update the app so that it is relevant to you and/or works with the iOS version that you have installed on your device.

Changes to This Terms and Conditions

We may update our Terms and Conditions from time to time. Thus, you are advised to review this page periodically for any changes. We will notify you of any changes by posting the new Terms and Conditions on this page.

These terms and conditions are effective as of 2021-06-26

Contact Us

If you have any questions or suggestions about our Terms and Conditions, do not hesitate to contact us at pd.bao@pbtechnic.com



Comments